3.1, A pneumatic strapping tool is for the friction hot melt type, through the high-speed friction overlapping plastic with heat bonding, so called friction hot melt.
3.2, Tthe compressed gas is introduced to the cylinder piston, the piston with the vibrator upper is connected by a shaft bolt. Vibrator forth vibration and friction plates are pressed together, so that the overlapping portions of the binding tape adhesive.
3.3, The vibrator Central has an oval hole, Fan the eccentric shaft of the motor is rotated back and forth in this hole.
3.4, The high-speed rotation of the air motor, maximum speed of 10, 000 rpm, makes the vibrator as the pendulum general high-speed movement.
3.5, Under the strapping with die by the end of the triangular teeth fixed in intercourse panel; Strap on vibrator triangular teeth friction generates heat as intense vibration and lower straps and adhesive. Tightening force, especially for steel, aluminum, wood, stone, chemical fiber and other products packaged.
3.6 It is a Pneumatic Combination Steel Strapping Machine 2, Applicable for both PP and PET strap
Pneumatic PET Strapping Tool
Widely used for paper industry, aluminum industry, steel industry,
Wood, wooden packaging, chemical fiber, cotton, tobacco, chemicals,
1: This pneumatic tool would make a rapid fusion with PET
Plastic strapping tapes. (shock friction), one time complete.
2: Cutting Blade adopt special steel No. 4241
3: This machine use air pump instead electricity motor.
Pneumatic motor, ZG40Cr Air Cylinder, 20CrMo Rotor.
4: A high degree of intensity, green and protect environment.
Friction weld seal
Max. Strapping Tension
280 x 160 x 180 mm
The Pneumatic Strapping Machine is applicable to most status of packaging fields and widely used in the export enterprises of iron, metal, textile, household electric appliance, foodstuff and daily merchandise, specialized in strapping big and heavy pallets.
The tools adopts PET band to finish a strap in a high speed, very easy to operating. PET band is high-tension, environmental -protection and no-pollution and can be used to replace steel strapping band. In short, the pneumatic strapping machine is very flexible to use in every packing fields.
Application(Pneumatic Hand Strapping Tool):
It applies to the export enterprises of iron, metal, textile, household electric appliance, foodstuff and daily merchandise, specialized in strapping big and heavy pallets.
Technical Characters of Pneumatic Hand Strapping Tool:
1. Straining, sticking & cutting the strap pneumatically in one time.
2. Driven by pneumatic motor with low noises & malfunction rate.
3. Don't need power & safe to operate.
4. Light weight for portable use or handling
5. Excellent tighten strength reach to 280 kgs.
6. Sealing the strap without the steel buckle and save the cost.
7. Suitable for the packing of the steel, timber, brick, fiber and so on.
Technical Specification(Pneumatic Hand Strapping Tool):
Pneumatic friction weld seal
Max. Strapping Force(N)
PET tape width(mm)
PET Tape Thickness(mm)