CE Approved Stamping Robot (MTR-CY5)
|FOB Price:||US $12,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $12,000/ Piece|
|Production Capacity:||3, 000PCS/Month|
|Transport Package:||Wooden Case|
|Payment Terms:||T/T, Paypal, Money Gram, Western Union|
- Model NO.: MTR-CY5
- Condition: New
- Maximum Load: 5kg
- Repositioning Accuracy: 0.1mm
- Working Time: 0~45
- Weight: 550kg
- Trademark: SME
- Origin: Shunde Guangdong
- Drive Mode: Electric
- Application: Welding, Load, Forging
- Maximum Working Radius: 1600mm
- Working Rhythm: 500-1000/H
- Mounting Type: Ground Installation
- Power: 0.8kw
- Specification: Quality standard: CE
- HS Code: 8465100000
1.Main Technical Parameter:
|Product Name||10KG Robot|
|Degree of Freedom||5|
|Movement range||1Axis(Arm oscillating axis)||360°|
|2Axis(Vertical lifting axis)||≤500mm|
|4Axis(Arm expansion bent axis)||1500mm~2200mm(Note:effect operating radius)|
|5Axis(End oscillating axis)||360°|
|Max.Speed||1Axis(Arm oscillating axis)||35r/min(210°/s)|
|2Axis(Vertical lifting axis)||15m/min(0.25m/s)|
|4Axis(Arm expansion bent axis)||12m/min(0.2m/s)|
|5Axis(End oscillating axis)||60r/min(360°/s)|
|Others||1, do not splash water, oil and dust;|
2, avoid contact with flammable and corrosive gases, liquids;
3, away from sources of electrical noise (plasma).
|Approx. Robot Mass||350KG Around|
|Mounting||Installation floor,footpad leveling|
1. Pneumatic, hydraulic punch machine can connect to each other, there are no requirements forthe equipment
2.The introduction of advantages of single-arm punch robot
tonnage, the height of punch and combinations of punches, it can save50-60% of the cost of equipment
investment for customers.
2. This product is suitable for all non-standard molds, it can be elevated at any angle in the punch platform.
Accuratelocations are set on the human-machine interface, thelocation selection can be finished by the
operator within three minutes.3. The device can be a stand-alone operation, you can use more than one
connection, there is nolimit of number of connected units. These units can be moved according to the actual
situation of production and production needs, either add or minus, so it is more suitable for the production of
4. The device is equipped with punching testing, product testing and volatile bruised stamping oil spray device,,so itslife can be extended,while the production of bad products can belowered. (This is specialfeature, which
requires special optional )
5. The machine uses vacuum gripper and built-in independent imported vacuum compressors while without any
influences of gas source of space, so the stability, security can be enhanced.
6. lt adopts the use of open- programmable technology that can store a variety of information and be
interchangeable, once set can be used for along time.
3.Advantage and Service
1.Have several senior engineers service in many countries, all the year round, with our after-sales office in countries.
2.Machines with quality guarantee for one year, life-long maintenance.
3.A lot of machines can be monitored via Internet, solve customer requirements immediately
4.Several senior engineers innovate and reform the technology continuous, in order to ensure the quality of mechanical stability.
5.Undertake various non-standard machinery, solve the customers' special requirements.